Cross-compatibility between different combinations of methacrylate-based resin composites and etch-and-rinse one-bottle adhesives was evidenced for products from different manufacturers. This represents a desirable property of adhesives as it allows the flexibility to select different composite systems based on the specific restorative needs. Objective: To compare dentin shear bond strength (SBS) of four combinations of light-activated one-bottle adhesives and composites to determine if cross-compatibility exists, and to determine if the use of the same manufacturer's adhesive and composite results in higher SBS than systems that combine different manufacturers' products. Methods: One hundred sixty human third molars were used for bonding (n=10). Specimens were treated with 37% phosphoric acid and one of four etch-and-rinse adhesives. Specimens were placed in a bonding jig, which was filled with one of four composites. Adhesives PQ1 (Ultradent), Excite (Ivoclar-Vivadent), Optibond Solo Plus (Kerr), and Single Bond (3M-ESPE) and composites Vit-l-Escence (Ultradent), Four Seasons (Ivoclar-Vivadent), Premise (Kerr), and Filtek Supreme Plus (3M-ESPE) were tested. SBS was measured at 24 hours and three months with a testing machine at a speed of 1 mm/min and expressed in MPa. A three-way analysis of variance and Tukey tests were used for data analysis. Results: Significant differences were evidenced among composites for each adhesive system (p<0.001) and among adhesives for each composite system (p<0.001). Optibond Solo Plus and PQ1 yielded significantly higher bond strengths than Single Bond and Excite for all composite systems (p<0.05). All combinations, with the exception of two, demonstrated a decrease in bond strength values after aging. Conclusions: Cross-compatibility was demonstrated, indicating that etch-and-rinse one-bottle adhesive systems can be safely used with composites from different manufacturers without a compromise to the bond strength. Moreover, even higher mean SBS values were demonstrated for selective combinations of different manufacturers' products.
Source: Operative dentistry Full text |
