نام کاربری :
رمز عبور :
  به خاطر بسپار
کلمه عبور را فراموش کرده ايد؟
ثبت نام کاربر جديد
AWT IMAGE

AWT IMAGE
جشنواره سال 1394: نفرات برتر مقاله پژوهشی پریودنتولوژی


نفرات برتر مقاله پژوهشی پریودنتولوژی

.

نفر اول مقاله پژوهشی پریودنتولوژی

Effect of Er: YAG laser irradiation on wettability, surface roughness, and biocompatibility of SLA titanium surface: an in vitro study

Nader Ayobian-Markazi,*Mohammadreza Karimi,Ali Safar-Hajhosseini

*Periodontic Department,Dental Branch,Islamic Azad University


Abstract


Purpose: The purpose of this study was to evaluate the effects of the surface treatment on the retention of implant supported zirconia restorations over short abutments.

Material and methods: Eighty solid abutments reduced to 3 mm in height and their corresponding fixture replicas were embedded vertically in autopolymerizing acrylic resin blocks. Eighty zirconia copings (Cercon) with an occlusal loop were fabricated and divided into 2 groups (n¼40). One group was airborne-particle abraded with 110 mm aluminium oxide and the other group was treated with silica coating (Rocatec System). Each group was then divided into 4 subgroups (n¼10). The subgroups received either no treatment (control) or were treated with silane (Clearfil Porcelain Bond ActivatorSE Primer), acid etching followed by silane, or ceramic primer (Clearfil). All copings were luted with a self-adhesive luting agent (Clearfil SA). After 1 week of conditioning in artificial saliva and thermal cycling (5000 cycles, 5_C-55_C), the removal force of the copings were tested with a universal testing machine at a 5 mm/min crosshead speed. The dislodgment force and failure mode were recorded. Two-way ANOVA and the Tukey honestly significant difference and the Fisher exact tests were used for data analysis (a¼.05). 

Results: The highest retentive values were obtained for airborne-particle abrasion–ceramic primer (228.84 N) and silica coating–ceramic primer (230.37 N), which were not significantly different from silica coating alone (216.26 N; P¼.95) or a combination of airborne-particle abrasion followed by silanation (211.67 N; P¼.87). The failure mode was primarily adhesive and cement principally remained on the copings.

Conclusions: Within the limitations of this study, ceramic primer that contains adhesive phosphate monomer significantly improved the retention of zirconia ceramic restorations. Silicoating as a mechanical treatment provided greater retention for zirconia copings than airborne-particle abrasion when a resin-luting agent was used.


The Journal of Prosthetic Dentistry / 2014;112:38-44.

.

نفر دوم مقاله پژوهشی پریودنتولوژی


Comparison of the penetration and passage of Streptococcus mutans and aggregatibacter actinomy-cetemcomitans through memnrans loaded with tetracycline,amoxicilline, and chlorhexidine: an in vitro study


Siamak Yaghobee,Nasrin Samadi,Afshin Khorsand,Amir Ali rasoli,Mahdi Kadkhodazadeh*


Lasers in Medical Science Vol 28, No 1; Jan 2013


بایگانی مطالب:

مطالب کدام بخش سایت بیشتر مورد نیاز شماست؟
پرسش و پاسخ
جشنواره شهید هدایت
کلینیک تخصصی دندانپزشکی
مجله علمی
نمایشگاه کتاب
نمایشگاه مواد و تجهیزات دندانپزشکی
نیازمندیها
   
:. کل کاربران ثبت شده: 168
:. کاربران حاضر در وبگاه: 0
:. میهمانان در حال بازدید: 15
:. تمام بازدید‌ها: 7349734
:. بازدید 24 ساعت قبل: 2189

کلیه حقوق این وب سایت متعلق به جامعه اسلامی دندانپزشکان می باشد.

صفحه اصلی | درباره ما | ارتباط با ما | نقشه سایت

Created in : 0.61 seconds with 51 queries by YEKTAWEB